Remove the rack latches
Use this information to remove the rack latches.
About this task
Attention: Read
"Installation Guidelines" on page 45
that you work safely.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1.
If the server is installed with the security bezel, remove it first. See
page
183.
Step 2.
On each side of the server, remove the two screws that secure the rack latch.
Figure 100. Rack latch screws removal
and
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Safety inspection checklist" on page 46
"Remove the security bezel" on
.
Chapter 5
Hardware replacement procedures
to ensure
157