Chapter 5. Hardware Replacement Procedures; Installation Guidelines - Lenovo ThinkSystem SR635 V3 User Manual

Chapter 5. Hardware replacement procedures

This section provides installation and removal procedures for all serviceable system components. Each
component replacement procedure references any tasks that need to be performed to gain access to the
component being replaced.

Installation Guidelines

Before installing components in your server, read the installation guidelines.
Before installing optional devices, read the following notices carefully:
Attention: Prevent exposure to static electricity, which might lead to system halt and loss of data, by
keeping static-sensitive components in their static-protective packages until installation, and handling these
devices with an electrostatic-discharge wrist strap or other grounding system.
• Read the safety information and guidelines to ensure your safety at work:
– A complete list of safety information for all products is available at:
https://pubs.lenovo.com/safety_documentation/
– The following guidelines are available as well:
and "Handling static-sensitive devices" on page
• Make sure the components you are installing are supported by your server.
– For a list of supported optional components for the server, see
– For the option package contents, see
• For more information about ordering parts:
1. Go to
http://datacentersupport.lenovo.com
2. Click Parts.
3. Enter the serial number to view a listing of parts for your server.
• When you install a new server, download and apply the latest firmware. This will help ensure that any
known issues are addressed, and that your server is ready to work with optimal performance. Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr635v3/7d9h//downloads/driver-list/
download firmware updates for your server.
Important: Some cluster solutions require specific code levels or coordinated code updates. If the
component is part of a cluster solution, verify that the latest level of code is supported for the cluster
solution before you update the code.
• If you replace a part, such as an adapter, that contains firmware, you might also need to update the
firmware for that part. For more information about updating firmware, See
283.
• It is good practice to make sure that the server is working correctly before you install an optional
component.
• Keep the working area clean, and place removed components on a flat and smooth surface that does not
shake or tilt.
• Do not attempt to lift an object that might be too heavy for you. If you have to lift a heavy object, read the
following precautions carefully:
– Make sure that you can stand steadily without slipping.
– Distribute the weight of the object equally between your feet.
© Copyright Lenovo 2023
"Working inside the server with the power on" on page 48
48.
https://serveroption.lenovo.com/
and navigate to the support page for your server.
https://serverproven.lenovo.com
.
"Update the firmware" on page
.
to
45