Step 3.
Remove the Integrated Diagnostics Panel assembly from the chassis.
Figure 38. Integrated Diagnostics Panel assembly removal
a.
Press down the extended tab on the other side of the front chassis.
b.
Slide the assembly out of the front chassis.
Step 4.
Remove the Integrated Diagnostics Panel from its assembly.
Figure 39. Integrated Diagnostics Panel removal
a.
Press down the clips as shown.
b.
Pull the Integrated Diagnostics Panel by its handle to get it out of its assembly.
After you finish
1. Install a new Integrated Diagnostics Panel assembly or filler. See
Panel assembly" on page
2. If you are instructed to return the old Integrated Diagnostics Panel assembly, follow all packaging
instructions and use any packaging materials provided.
Install the Integrated Diagnostics Panel assembly
Use this information to install the diagnostics panel assembly.
ThinkSystem SR635 V3 User Guide
82
82.
"Install the Integrated Diagnostics