Install The Internal Cff Hba/Raid Adapter - Lenovo ThinkSystem SR645 V3 User Manual

Install the internal CFF HBA/RAID adapter

Use this information to install the internal CFF HBA/RAID adapter.
About this task
Attention:
• Read "Installation Guidelines" on page 35
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
CTkyVDu-5Lhy1r9G-4PQGl
Procedure
Step 1. Touch the static-protective package that contains the internal CFF HBA/RAID adapter to any
unpainted surface on the outside of the server. Then, take the internal CFF HBA/RAID adapter out
of the package and place it on a static-protective surface.
Step 2. Align the notches on the tray with the pins on the chassis, place down the internal CFF HBA/RAID
adapter, and slightly slide it as shown to secure it on the chassis.
Figure 47. Internal CFF HBA/RAID adapter installation
Step 3. Connect cables to the internal RAID adapter. See
After you finish
and "Safety inspection checklist" on page 36
44.
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"CFF RAID adapter" on page
.
Chapter 5 Hardware replacement procedures
to ensure that you
159.
73