60 Installation and configuration
Figure 9
Wall-mounting the Fiber Remote Multi-IPE Interface unit
Installing local superloop cables
The number of A0634495 Local Superloop cables required to connect
the network I/O panel 24-pin Centronics connectors to the 37-pin D Shell
SUPERLOOP connectors on the Fiber Remote Multi-IPE Interface I/O
panel depends on the number of superloops required to support the
Remote IPE site(s) configuration. Refer to
Fiber Remote Multi-IPE Interface unit cable connection diagram" (page
152)
Copyright © 2007-2009 Nortel Networks
.
for the connection diagram.
Note:
Use the superloop connection plan that you completed based
on the traffic blocking criteria for Remote IPE segments and
"Superloop connection configurations" (page
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
Figure 15 "Local site single
14).
Table 2