Nortel Communication Server 1000 Series Manual page 120

Fiber remote multi-ipe interface fundamentals
Table of Contents

Advertisement

120 Remote IPE maintenance
Alternatively, manually select continuity tests that check continuity between
the Superloop Network card in the local system and the Peripheral
Controller card in the Remote IPE module, as well as other network
and peripheral cards. Specify these tests in Background Signaling and
Switching program LD 45. BSD messages indicate the status of the
network continuity tests and other network problems.
Superloop and Controller cards maintenance commands
The maintenance commands for the Superloop Network card and
Peripheral Controller cards are used to manipulate the operational status
and perform diagnostic tests on these cards. These commands are
located in Network and IPE Diagnostic LD 32, which can be accessed
using the administration terminal or the MMI terminal used in the Host SDI
mode.
Table 27 "Network superloop maintenance commands" (page 120)
superloop maintenance commands provided by Network and IPE
Replacement Diagnostic LD 32. NPR000 are diagnostic messages
displayed to indicate the status of the equipment.
Table 27
Network superloop maintenance commands
Maintenance
command
DISL loop
ENLL loop
DISS l s
ENLS l s
DSXP x
ENXP x
ENXP XPEC x
STAT loop
SUPL loop
XNTT loop
XPCT x
XPEC x
IDC
Copyright © 2007-2009 Nortel Networks
.
Maintenance command description
Disables network loop
Enables network loop
Disables a shelf or module
Enables a shelf or module
Disables Peripheral Controller and all IPE cards
Enables Peripheral Controller and all IPE cards
Enables Peripheral Controller but not IPE cards
Displays status for one or all network loops
Prints data for one or all superloops. Maps from
superloop number to IPE controller number.
Self-test on a Network card for a specific loop
Self-test on Peripheral Controller x
Prints data for Peripheral Controller x. Maps from IPE
controller number to superloop number.
Test Card-LAN operation and queries superloop,
peripheral controller, and IPE cards. Returns part
numbers and serial numbers of cards.
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
lists

Advertisement

Table of Contents
loading

This manual is also suitable for:

Communication server 1000e cp piiCommunication server 1000e cp pivCommunication server 1000e cp pmCommunication server 1000m single group cp piiCommunication server 1000m single group cp pivCommunication server 1000m multi group cp pii ... Show all

Table of Contents