Figure 1
Local system to Remote IPE connection over the fiber-optic link
Fiber Remote Multi-IPE Interface options
The Fiber Remote Multi-IPE Interface is available in the following four
different options:
•
•
•
•
These Fiber Remote Multi–IPE Interface options allow you to configure
the superloop connections at the remote site the same way they are
configured for the IPE modules at the local site. A Superloop Network card
can be connected to support one to eight segments in an IPE module the
same way it supports them in a local IPE module. A Superloop Network
card can support a co-located IPE module with, for example, the superloop
extended from the faceplate connector J1 and the Remote IPE site with
the superloop extended from the faceplate connector J2 at the same time.
Copyright © 2007-2009 Nortel Networks
.
Single-mode fiber supporting four superloop
Single-mode fiber supporting two superloops
Multi-mode fiber supporting four superloops
Multi-mode fiber supporting two superloops
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
System description 13