Late Configuration: Change The Gateway's Protocol - HMS Networks Intesis IN770AIR00XO000 User Manual

Midea commecial and VRF with KNX, Serial and IP support

7. Late Configuration: Change the Gateway's Protocol

Reconfiguring the gateway with a different protocol is very easy:
1. Connect the gateway to the PC and open the configuration tool Intesis MAPS.
2. Select the new template you need.
3. Click Next or double-click the template in the list.
4. A message will pop up, asking if you want to save the project currently loaded in the gateway.
5. Click Yes or No, depending on your needs.
6. Configure the needed parameters and signals for your new project.
7. Send the configuration to the gateway.
NOTE
For a complete gateway configuration guide, please refer to the
IN770AIR00xO000.
Page 32 of 34
Late Configuration: Change the Gateway's Protocol
Intesis MAPS User manual for
USER MANUAL Version 1.0.1