Table of Contents
Advertisement
Late Configuration: Change the Gateway's Protocol
7. Late Configuration: Change the Gateway's Protocol
Reconfiguring the gateway with a different protocol is very easy:
1.
Connect the gateway to the PC and open the configuration tool Intesis MAPS.
2.
Select the new template you need.
3.
Click Next or double-click the template in the list.
4.
A message will pop up, asking if you want to save the project currently loaded in the gateway.
5.
Click Yes or No, depending on your needs.
6.
Configure the needed parameters and signals for your new project.
7.
Send the configuration to the gateway.
NOTE
For a complete gateway configuration guide, please refer to the
IN775FGL00xO000.
USER MANUAL Version 1.0.7
Fujitsu VRF systems with KNX, Serial and IP support
Intesis MAPS Configuration Guide for
Page 39 of 41
Advertisement
Table of Contents
