Table of Contents
Advertisement
Security Switch
4.6. Security Switch
IMPORTANT
After completing the configuration of the Communicator, lock the security
switch to prevent unauthorized access to the Communicator built-in web
interface.
When the security switch is in its locked position, the Communicator built-in web interface
can not be accessed and the Communicator can not be configured using the built-in web
interface. Network specific parameters, configured via the PLC is still available.
To Lock and Unlock the Security Switch
Figure 8. Security switch in locked and unlocked position
SP2980 Version 1.21
®
Anybus
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Page 19 of 32
Advertisement
Table of Contents
