A-2-5 Checking Communications Status With The Sysmac Studio And Troubleshooting; Checking Communications Status With The Sysmac Studio - Omron sysmac NX102-9 Series Owner's Manual

Appendices
A-2-5 Checking Communications Status with the Sysmac Studio and
Troubleshooting
You can monitor the communications status of the EtherNet/IP connections after their settings are set.
You can also check errors.
Precautions for Correct Use Precautions for Correct Use
Make sure that the connection settings in both the Sysmac Studio and the Controller are consis-
tent before using the monitor functions. You can use the Comparison on page A-34 to see if they
are the same.

Checking Communications Status with the Sysmac Studio

You can check the communications status on the EtherNet/IP connections in the EtherNet/IP Connec-
tion Monitor Tab Page.
1
Select EtherNet/IP Connection Settings from the Tools Menu to display the EtherNet/IP
Device List Tab Page.
2
Right-click the Controller you want to check the communications status and select Monitor from
the menu.
The pane to monitor the EtherNet/IP connection is displayed. This pane has six tabs for each
communications status.
3
Select one of the six tabs for which you want to confirm the communications status.
• Status Tab Page
This tab page gives the TRUE/FALSE status of the system-defined variables that monitors the
tag data link errors and communication status. If any of the variables are TRUE, the checkbox
in front of the variable will be selected. Refer to 16-2-1 The Network Configurator's Device
Monitor Function for details on each status item.
A-36
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)