Specifying Host Names - Omron sysmac NX102-9 Series Owner's Manual

1-4-9

Specifying Host Names

You can directly specify IP addresses, but you can also use the host names instead of the IP addresses
for NTP servers, SNMP managers, or the destinations of socket instructions and CIP communications
instructions (DNS client or hosts settings).
Example: Setting Host Names on the DNS Server
DNS server
IP address
Host name
NJ/NX-series
Controller
Precautions for Correct Use Precautions for Correct Use
A DNS server is required to use the server host names for the DNS client.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Ethernet
Built-in EtherNet/IP port
1 Introduction
1
1-23