Creating Tags And Tag Sets - Omron sysmac NX102-9 Series Owner's Manual

Machine automation controller, cpu unit built-in ethernet/iptm port

Table of Contents

7 Tag Data Link Functions

Creating Tags and Tag Sets

You must create the tag sets and set member tags required to create connections for a registered Eth-

erNet/IP Unit. You can set the network variables used in control programs for tags.

This section first describes the basic procedure to create tags and tag sets (1, below). Then it explains

how to import variables with a Network Publish attribute from the Sysmac Studio to the Network Config-

urator (2, below).

Then it explains how to effectively use network variables for tags.

(1) Creating Tags and Tag Sets with the Network Configurator's Device Parameter Edit-

ing Function

(2) Importing Variables with a Network Publish Attribute Created in the Sysmac Studio

to the Network Configurator

(1) Creating Tags and Tag Sets with the Network Configurator's

Device Parameter Editing Function

 Creating a Tag Set

Double-click the icon of the device for which to create a tag set to display the Edit Device

Parameters Dialog Box. Right-click the icon to display the pop-up menu, and select Parameter

NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)