Omron sysmac NX102-9 Series Owner's Manual page 509

Setting Connections for the Originator Device
After the tag set registration, set the connection settings for transferring data using the EtherNet/IP con-
nections.
Make the connection settings in the originator device (i.e., Controller 1 in this example) only.
Register the tag and tag set for Controller 2 (Target device) before setting the connection settings as
described in this example.
Refer to Registering the Tag and Tag Set for the Target Device on page A-27 for the operations for reg-
istering tags and tag sets.
Precautions for Correct Use Precautions for Correct Use
If you change the IP address, model, or revision of the target device after making the connection
settings, you must also change the target device settings that are included in the connection set-
tings. For information on how to change the target device settings in the connection settings,
refer to Changing the Target Device Settings after Making Connection Settings.
1
Select EtherNet/IP Connection Settings from the Tools Menu to display the EtherNet/IP
Device List Tab Page.
2
Right click Built-in EtherNet/IP Port Settings for Controller 1 (originator device in this example)
and select Edit from the menu.
The EtherNet/IP Connection Setting Tab Page is displayed.
3
Click the
4
Select CJ1W-EIP21(NJ) from Target Device in the Toolbox on the right of the tab page.
This operation displays the target device tag set Net_Out1 that is set for Controller 2 in the
Variable Name column.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
(Show Connection Display) icon in the EtherNet/IP Connection Setting Tab Page.
Appendices
A
A-19