16-2 Checking Status with the Network
Configurator
16-2-1 The Network Configurator's Device Monitor Function
Connect the Network Configurator online, select the device to be checked, right-click to display the
pop-up menu, and select Monitor.
The Monitor Device Dialog Box will be displayed.
Additional Information
If a communications error occurs during monitoring, the dialog box will continue to show the last
information that was collected. To start monitoring again, close the Monitor Device Dialog Box,
and then open the dialog box again.
You cannot monitor the CIP Safety communications status with Network Configurator. Refer to the
NX-series Safety Control Unit User's Manual (Cat. No. Z930) for details on confirming CIP Safety
communications status.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
16 Troubleshooting
16-3
16