5.3
Applicable Engineering Tool
GX Works3 is required to set the FX5-ENET.
To use digital certificates for e-mail or MQTT functions, Certificate Configuration Tool for FX5-ENET is required.
The applicable engineering tools are shown as follows.
Engineering tool
GX Works3
Certificate Configuration Tool for FX5-ENET
About GX Works3
For the latest version of GX Works3, please consult your local Mitsubishi Electric representative.
■GX Works3 version check
Display information such as the software version of GX Works3.
Select [Help] [Version Information...].
Certificate Configuration Tool for FX5-ENET
For Certificate Configuration Tool for FX5-ENET, please consult your local Mitsubishi Electric representative.
■Operating environment, installation and uninstallation
For the operating environment and installation/uninstallation of Certificate Configuration Tool for FX5-ENET, refer to the
following.
Certificate Configuration Tool for FX5-ENET Installation Instructions
■Operation methods and functions
For operation methods and functions of Certificate Configuration Tool for FX5-ENET, refer to the following.
Page 85 Certificate Configuration Tool for FX5-ENET
Applicable versions
Ver. 1.050C or later
Ver. 1.00A or later
5 SYSTEM CONFIGURATION
5.3 Applicable Engineering Tool
5
63