Mitsubishi Electric MELSEC iQ-F Series User Manual page 148

IP address storage area clear request
■IP address storage area clear request (Un\G58)
Specify whether to clear the data in the IP address storage area.
• 0: Not clear
• 1: Clear
IP address storage area clear status
■IP address storage area clear status (Un\G59)
You can confirm whether or not the IP address storage area is cleared.
Address Bit
Un\G59 b0
b1
IP address change function enable flag
■IP address change function enable flag (Un\G60)
You can confirm whether or not the IP address change function is enabled.
• 0: Disable
• 1: Enable
IP address storage area write error code
■IP address storage area write error code (Un\G61)
Stores error codes if writing to IP address storage area fails.
• 0: Normal (no error)
• 1920H: Values of IP address setting and other settings (Un\G50 to Un\G55) are out of the setting ranges.
IP address storage area clear error code
■IP address storage area clear error code (Un\G62)
Stores error codes if clearing of IP address storage area fails.
• 0: Normal (no error)
• 1921H: 'IP address storage area write request' (Un\G56) and 'IP address storage area clear request' (Un\G58) were
simultaneously turned off and on.
IP address
■IP address (Un\G64 to Un\G65)
Stores IP address on the own station set with GX Works3. ( Page 69 Basic Setting) The stored values can be changed by
the IP address change function.
Address Description
Un\G64 3rd octet, 4th octet
Un\G65 1st octet, 2nd octet
Ex.
When IP address is 192.168.3.250: Un\G64 = H03FA, Un\G65 = HC0A8
If the IP address is changed by the IP address change function, priority will be given to the IP address stored
by the IP address change function. To enable the set value in GX Works3, clear the IP address storage area.
APPX
146
Appendix 4 Buffer Memory
Name
IP address storage area clear
completed
IP address storage area clear error
Description
Turns on when clearing of IP address storage area completes or fails.
Turns off when 'IP address storage area clear request' (Un\G58) is changed from 1 to 0.
Turns on when clearing of IP address storage area fails.
Turns off when 'IP address storage area clear request' (Un\G58) is changed from 1 to 0.