Starting Certificate Configuration Tool For Fx5-Enet - Mitsubishi Electric MELSEC iQ-F Series User Manual

7.5
Starting Certificate Configuration Tool for FX5-
ENET
After starting Certificate Configuration Tool for FX5-ENET, register and list trusted certificates or CRLs (certificate revocation
lists) and manage client certificates.
Operating procedure
1.
Display the "Module Tool List" window on GX Works3.
[Tool]  [Module Tool List]
2.
Start Certificate Configuration Tool for FX5-ENET.
[Information Module]  [Certificate Configuration Tool]
3.
Register and list trusted certificates or CRLs (certificate revocation lists) and manage client certificates.
For details, refer to the following.
Page 85 Certificate Configuration Tool for FX5-ENET
• Certificate Configuration Tool for FX5-ENET can be started from the Module Tool List for the GX Works3
version "1.095Z" or later. When using GX Works3 whose version is lower than "1.095Z", start it from the
start menu or shortcut that is created when Certificate Configuration Tool for FX5-ENET is installed.
• Certificate Configuration Tool for FX5-ENET can still be operated independently even when GX Works3 is
terminated during operation.
7 PARAMETER SETTINGS
84

7.5 Starting Certificate Configuration Tool for FX5-ENET