Mitsubishi Electric MELSEC iQ-F Series User Manual page 37

E-mail setting change function
This function changes the e-mail settings of the Ethernet module by setting information required for sending e-mail, such as
account information, from a peripheral to the buffer memory and turning on 'E-mail setting storage area write request'
(Un\G4370).
Information such as the sender e-mail address of the Ethernet module can be changed without the engineering tool.
When the e-mail setting change function is used, instead of the e-mail settings configured with the module parameters in the
engineering tool, information such as the sender e-mail address stored in the e-mail setting storage area is set to the Ethernet
* 1
module.
*1 Check 'E-mail setting change function enable flag' (Un\G4374) to find out which settings are being used.
In addition, turning on 'E-mail setting storage area clear request' (Un\G4372) can enable the e-mail settings configured with
the module parameters in the engineering tool to become active again.
(1)
Un\G4173 TLS setting
Un\G4174
Sender
e-mail address
Un\G4205
Un\G4206
Sender name
Un\G4269
Ethernet communications/
Serial communications
(RS-485/422/232)
Peripheral
(3)
Un\G4173
Un\G4174
Un\G4205
Un\G4206
Un\G4269
(1) Use the device write operation to store information such as the sender e-mail address in the buffer memory.
(2) Turn on 'E-mail setting storage area write request' (Un\G4370), which causes the information such as the sender e-mail address in the buffer memory to be
stored in the e-mail setting storage area.
(3) The e-mail settings stored in the e-mail setting storage area are used for operation.
(2)
Un\G4173
Un\G4174
Un\G4205
Un\G4206
Un\G4269
CPU module and
Ethernet module
TLS setting
Sender
e-mail address
Sender name
TLS setting Un\G4173
Sender
e-mail address
Sender name
Turn on
Un\G4370.
TLS setting
Sender
e-mail address
Sender name
4 FUNCTION LIST
4.3 Other Functions
4
35