Mitsubishi Electric MELSEC iQ-F Series User Manual page 40

■Operation to write to the e-mail setting storage area
Store desired data, such as a new sender e-mail address, in E-mail send function (Un\G4173 to Un\G4369) and turn 'E-mail
setting storage area write request' (Un\G4370) from 0 to 1 or from 0 to 2. This causes the data to be written to the e-mail
setting storage area.
The difference in setting values of 'E-mail setting storage area write request' (Un\G4370) is as follows.
• 0 to 1: Include the writing of 'Password' (Un\G4337 to Un\G4368).
• 0 to 2: Do not include the writing of 'Password' (Un\G4337 to Un\G4368).
Buffer memory
Un\G4173 TLS setting
Sender e-mail address
Un\G4174
Un\G4205
Un\G4206 Sender name
Un\G4269
Un\G4270 SMTP server specification method
Un\G4271
SMTP server name/IP address
Un\G4302
Un\G4303
SMTP port number
Un\G4304 Authentication method
Un\G4305 User name
Un\G4336
Un\G4337 Password
Un\G4368
Un\G4369 Certificate verification setting
The following table lists data items to be written into the e-mail setting storage area.
Item name
TLS setting
Sender e-mail address
*1
Sender name
SMTP server specification method
SMTP server name / IP address
SMTP port number
Authentication method
User name
*2
Password
Certificate verification setting
*1 The sender name can be omitted.
*2 Data can be written only when 'E-mail setting storage area write request' (Un\G4370) is turned from 0 to 1.
*3 If 'Certificate verification setting' (Un\G4369) is enabled, settings with Certificate Configuration Tool for FX5-ENET are required.
4 FUNCTION LIST
38
4.3 Other Functions
*1
*3
E-mail setting storage area
TLS setting
Sender e-mail address
Sender name
SMTP server specification method
SMTP server name/IP address
Writing data
SMTP port number
Authentication method
User name
*2
Password
Certificate verification setting
Description
Specifies whether to enable or disable the TLS setting.
When the TLS setting is disabled, TCP connection is enabled.
Specifies the e-mail address of the sender.
Specifies the sender name.
Specifies whether to use a server name or IP address to specify the SMTP
server.
Specifies the server name in ASCII format when the SMTP server
specification method is set to server name.
Specifies the IP address in binary code when the SMTP server specification
method is set to IP address.
Specifies the SMTP server port number.
Specifies the SMTP server authentication method.
Specifies the user name for SMTP server authentication.
Specifies the password for SMTP server authentication.
Specifies whether to verify certificates received from the server.
*1