E-Mail Settings - Mitsubishi Electric MELSEC iQ-F Series User Manual

E-mail settings

Configure settings for e-mail.
Item
To Use or Not to Use Mail Function Setting
Send Source Name
SMTP Server Settings
SMTP Server
Authentication
Information
SMTP Server Settings Authentication Certificate
Verification
Send Mail Address
Setting
7 PARAMETER SETTINGS
82
7.4 Application Settings
Description
Set whether to use the e-mail function.
Sender Name Specifies the sender name as a Unicode string (UTF-16).
Sender e-mail address Set the e-mail address of the Ethernet module in ASCII.
Specification Method Set how to specify the outgoing mail server.
IP Address Set the IP address of the SMTP server.
Host Name Set the host name of the SMTP server.
Port No. Set the outgoing mail server port number.
SMTP Server Settings Set the authentication method for the outgoing mail server.
Authentication
Authentication Method
SMTP Server Settings Set the login ID for the outgoing mail server in ASCII.
Authentication User
Name
SMTP Server Setting Set the password for the outgoing mail server in ASCII.
Authentication
Password
Specifies whether to verify the certificate.
Detailed Setting (No.1 Set destination mail addresses. A maximum of 10 addresses can
to 10) be set.
When sending an e-mail by the Ethernet module, the module
function block "Preset destination address instruction" is used in
a program to select among destination mail addresses 1 to 10.
Setting range
• Not used
• Used
(Default: Not used)
64 characters (64 words) or less
This item can be left blank.
(Default: Blank)
64 characters (32 words) or less
(Default: Blank)
• Host Name
• IP Address
(Default: Host Name)
0.0.0.1 to 223.255.255.254
This item is not available when
"Specification Method" is set to "Host
Name".
(Default: Blank)
64 characters (32 words) or less
This item is not available when
"Specification Method" is set to "IP
Address".
(Default: Blank)
• No authentication: 25
• SMTPS: 465
• Specify a number: 1 to 65534
(Default: 25)
• No authentication
• SMTP-AUTH
(Default: No authentication)
64 characters (32 words) or less
This item is not available when "SMTP
Authentication Method" is set to "No
authentication".
(Default: Blank)
64 characters (32 words) or less
This item is not available when "SMTP
Authentication Method" is set to "No
authentication".
(Default: Blank)
• Not to verify the certificate
• Verify the certificate
(Default: Not to verify the certificate)
Each mail address must have 64
characters (32 words) or less.
This item can be left blank.
(Default: Blank)