Mitsubishi Electric MELSEC iQ-F Series User Manual page 154

Remote input (RX)
■Remote input (RX) (Un\G1000 to Un\G1127)
This stores the input data (bit unit) sent from the remote station to the master station (FX5-ENET) with cyclic transmission.
Address Bit
Un\G1000 b0
b1

b15

Un\G1127 b0 to b15
Remote output (RY)
■Remote output (RY) (Un\G1256 to Un\G1383)
Set the output data (bit unit) to be sent from the master station (FX5-ENET) to the remote station with cyclic transmission.
Address Bit
Un\G1256 b0
b1

b15

Un\G1383 b0 to b15
Remote register (RWr)
■Remote register (RWr) (Un\G2000 to Un\G3023)
This stores the input data (word unit) sent from the remote station to the master station (FX5-ENET) with cyclic transmission.
Address Remote register
Un\G2000 RWr0
Un\G2001 RWr1

Un\G3023 RWr3FF
Remote register (RWw)
■Remote register (RWw) (Un\G3024 to Un\G4047)
Set the output data (word unit) to be sent from the master station (FX5-ENET) to the remote station with cyclic transmission.
Address Remote register
Un\G3024 RWw0
Un\G3025 RWw1

Un\G4047 RWw3FF
APPX
152
Appendix 4 Buffer Memory
Remote input
RX0
RX1
RXF
RX7F0 to RX7FF
Remote output
RY0
RY1
RYF
RY7F0 to RY7FF
Description
• On: Remote input is turned on.
• Off: Remote input is turned off.
Description
• On: Remote output is turned on.
• Off: Remote output is turned off.
Description
0 to 32768
Description
0 to 32768