ADTRAN Total Access 3000 System Manual page 397

Perform Steps Below in the Order Listed
3. As an example, from the Daily Threshold Menu select option 1, Code
Violation.......S, and press <Enter>.
1. Set Alarm Threshold
2. Set Alarm Enable
Set the Alarm Threshold by selecting option 1, Set Alarm Threshold, and inputting the
desired threshold. Finally, enable the alarm by selecting option 2, Set Alarm Enable,
and setting to On. This will cause that alarm to be issued if the set threshold value is
exceeded.
4. Return to the Performance Monitoring Menu by pressing <Esc>.
5. From the Performance Monitoring Menu select option 6, STS1 Far-End Daily
Thresholds, and press <Enter>.
1. Code Violation
2. Errored Second
3. Severely Errored Second
4. Unavailable Second
5. Code Violation
6. Errored Second
7. Sev Errored Second
8. Unavailable Second
6. For an example, from the Far-End Daily Threshold Menu select option 2, Errored
Second......L, and press <Enter>.
1. Set Alarm Threshold
2. Set Alarm Enable
Set the Alarm Threshold by selecting option 1, Set Alarm Threshold, and inputting the
desired threshold. Finally, enable the alarm by selecting option 2, Set Alarm Enable,
and setting to On. This will cause that alarm to be issued if the set threshold value is
exceeded.
Total Access ® 3000/3010 System Manual
TOTAL ACCESS 3000/3010
125
Off
L
L
L
L
P
P
P
P
100
Off
6TADLP741-1E
DLP-741
Page 5 of 8
© 2003, ADTRAN, Inc.