ADTRAN Total Access 3000 System Manual page 257

Total Access 3000/3010 Detailed Level Procedures
Find Your Task in the List Below
Removing and Replacing the Rear Plastic Guard
Connecting a Composite Clock Input to a Shelf
Connecting a Primary and Secondary T1 Clock to a Shelf
Connecting a Shelf to MLT Equipment
Connecting a Shelf to DLT Equipment
Connecting a Shelf to a DSX-1 Cross-Connect
Connecting a Shelf to the MDF
Installing the High-Speed Connector Module
Connecting the High-Speed Cabling
Connecting the External Alarm Outputs
Connecting a Fan Module Alarm
Making RS-485 Bus Connections Between Shelves
Connecting a Shelf to an External Modem
Connecting a Shelf to the X.25 Network
Connecting the Terminal or PC to the Craft Port
Logging on to the System
Setting TIRKS Parameters in the SCU
Setting IP Parameters for an SCU
Routing Fiber through the Heat Baffle
Verifying Wiring to the DSX-1 Cross-connect
Verifying Shelf Wiring to MDF
Verifying Composite Clock Waveforms
Verifying the Fan Unit Alarm Connection to the SCU
Verifying the Alarm Relay Output Connections
®
Total Access 3000/3010 System Manual
6TADLP000-1E
TOTAL ACCESS 3000/3010
SECTION 7
Then Go To:
© 2003, ADTRAN, Inc.
Page 1 of 2
DLP-701
DLP-702
DLP-703
DLP-704
DLP-705
DLP-706
DLP-707
DLP-708
DLP-709
DLP-710
DLP-711
DLP-712
DLP-713
DLP-714
DLP-715
DLP-716
DLP-717
DLP-718
DLP-719
DLP-720
DLP-721
DLP-722
DLP-723
DLP-724