Perform Steps Below in the Order Listed
8. Install Plexiglass Guard
Using a #1 Phillips-head screwdriver, reinstall the long thin Plexiglass guard using
the screws (2) threaded into the standoffs just reinstalled.
1.3
Followup Procedures
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated there.
Total Access 3000/3010
®
System Manual
6TADLP701-1E
TOTAL ACCESS 3000/3010
© 2002, ADTRAN, Inc.
DLP-701
Page 3 of 4