ADTRAN Total Access 3000 System Manual page 361

Perform Steps Below in the Order Listed
Each user that logs in is assigned to one Server. Servers are assigned from the
bottom up, so that Server 4 is used first, Server 3 next, and so forth.
10. Have the OSS Perform a TL1 Cancel User Command
Ask the OSS personnel to log off the SCU by performing the following command:
canc-user::test:2:end;
Once the log off is completed, have the OSS personnel drop the X.25 call.
11. Repeat for Each OSS
Repeat Steps 7 through 10 for each OSS that should be able to connect to the SCU.
12. Logoff the SCU
Press <ESC> on the local VT100 interface until you arrive back at the Main Menu.
Choose menu option 6 to logoff the SCU.
1.3 Followup Procedures
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated there.
Total Access ® 3000/3010 System Manual
TOTAL ACCESS 3000/3010
NOTE
6TADLP726-1E
DLP-726
Page 5 of 6
© 2002, ADTRAN, Inc.