ADTRAN Total Access 3000 System Manual page 385

Perform Steps Below in the Order Listed
1. From the Provisioning Menu select option 1, Framing, and press <Enter>.
CBIT – CBIT parity format is enabled.
1.
M13 – M13 only format is enabled.
2.
3. Auto-detect – The MUX detects the framing format of the far end
terminal and adjusts the local framing format accordingly.
Select the desired option by typing the corresponding number and press <Enter>.
2. From the Provisioning Menu select option 2, Line Build Out, and press <Enter>.
Short – The cable length is less than 225 feet of 734A or equivalent coaxial
1.
cable or less than 100 feet of Lucent
2. Long – The cable length is greater than 225 feet of 734A or equivalent
coaxial cable or greater than 100 feet of Lucent
cable.
Select the desired option by typing the corresponding number and press <Enter>.
3. From the Provisioning Menu select option 3, Clock Source, and press <Enter>.
Local – DS-3 transmit clock is provided by a local 44.736 Mhz (+20 ppm)
1.
clock.
Loop – DS-3 transmit clock is provided by a recovered network clock.µ
2.
Select the desired option by typing the corresponding number and press <Enter>.
4. From the Provisioning Menu select option 5, Linked Provisioning, and press
<Enter>.
This option is only necessary if a second MUX will be employed. If a single
configuration is being implemented, disregard this option and proceed to Step 5.
Disable – Provisioning changes to either MUX will affect only the unit for
1.
which the changes were made.
Enable – Linked Provisioning ensures that provisioning changes made to one
2.
unit are automatically reflected in the other unit and is recommended for a 1:1
protection configuration. Please note that Service State is not a Linked option
and will not be reflected in the other unit.
Select the desired option by typing the corresponding number and press <Enter>.
®
Total Access 3000/3010 System Manual
TOTAL ACCESS 3000/3010
TM 735 or equivalent coaxial cable.
TM
735 or equivalent coaxial
© 2003, ADTRAN, Inc.
6TADLP740-1E
DLP-740
Page 3 of 10