Register Address; Bit - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Parameters
7.2.2.13

Register Address

This parameter is used to define the address of the register (DEC) in the server's memory range.
Option
0 ... 65535
Prerequisites for visibility
7.2.2.14

Bit

This parameter is used to define the start bit within the data point in the assigned register.
The options in the Bit parameter are only adjustable when the Format:4: BitFields option is selected.
Option
1 ...x ... 15... -
Note
The # Bits parameter defines the number of specific bits in the assigned register.
Prerequisites for visibility
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
• This parameter is in the Config Device x parameter window.
• This parameter is in the Config Device x parameter window.
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 49