Device Configuration App (Dca) - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Commissioning
6.6

Device Configuration App (DCA)

For easy configuration, the DCA "MG/S 11.100.1.1 Template Configuration" is recommended. With this
DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template.
The DCA can also be used to import ready-made device templates from a database.
The DCA "ABB MG/S11.100.1.1 Template Configuration" is available for download from the
Note
The DCA is a device-specific app and is not available for demo versions of ETS.
Note
For information on how to activate the DCA, see the
for ETS Version 6.
The following functions are available in the DCA:
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
• Export Device Templates
Import Device Templates
•
• Edit Devices
Firmware Updates
•
KNX article for ETS Version 5 and the
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 23
KNX Shop.
KNX article