ABB i-bus
®
KNX
Commissioning
6.6.4
Firmware Updates
Click "Firmware Manager" to update the firmware of the gateway.
1.
Select device(s)
2.
There are two options:
Note
The gateway requires a KNX programming interface that supports an extended address range.
Note
The connection to the database is made via an https website that uses Port 443.
Please contact ABB if you have any further questions about the database.
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
a.
"Online mode" activated: use "Scan" to select firmware file from online database
b.
"Online mode" deactivated: select firmware file from local storage location
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 27