Device X Server Address - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Parameters
7.2.2.2

Device x Server Address

This parameter defines the server addresses.
Each Modbus server must be given a unique server address. The setting must be made on the server
itself and must match this parameter.
Note
Address duplication can cause conflicts.
Option
1 ... 254
Note
This parameter appears in two places:
The General parameter window
•
• The device parameter window
Changing it in one parameter window also changes it in the other.
Prerequisites for visibility
42 9AKK108467A5941 Rev. B | MG/S 11.100.1.1 | EN | Product Manual
• This parameter is in the Config Device x parameter window.
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page