Operation; Operation Value - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Parameters
7.2.2.17

Operation

This parameter is used to define the mathematical operation.
The options Multiply by and Divide by are arithmetical connections that are always available.
For unidirectional data points (either the Read Function or the Write Function), there are also logical
connections available.
These are:
These logical connections return "1" if the result corresponds to the condition and "0" if not.
Option
-
Multiply by ( x )
Divide by ( - )
Equals ( = )
Is not equal to ( ≠ )
Less than ( < )
Greater than ( > )
Prerequisites for visibility
7.2.2.18

Operation Value

This parameter is used to define the value for the operation.
Option
-32768 ... 0 ... 32767
Prerequisites for visibility
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
equals ( = )
•
• is not equal to ( ≠ )
is less than ( < )
•
is greater than ( > )
•
The function is deactivated.
Multiplies the value.
Divides the value.
The value is the same.
The value is different.
The value is less than.
The value is greater than.
• This parameter is in the Config Device x parameter window.
This parameter is in the Config Device x parameter window.
•
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 51