Device X Name - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Parameters
7.2.2.1

Device x Name

This parameter is used to specify an individual description for a device.
Option
Free text entry
Note
This parameter appears in two places:
• The General parameter window
The device parameter window
•
Changing it in one parameter window also changes it in the other.
Prerequisites for visibility
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
Maximum 64 ASCII characters; the maximum number of characters may vary for
other character formats.
• This parameter is in the Config Device x parameter window.
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 41