Configuration; Configuring A Pc To Communicate With Awin Gw100 Rev.2 Wirelesshart Gateway; Figure 8: Properties Window To Change Ip Address Of A Pc - ABB GW100 User Manual

CO NF IG UR AT IO N
6

Configuration

6.1 Configuring a PC to communicate with AWIN GW100
rev.2 WirelessHART Gateway
1. Connect the AWIN GW100 rev.2 to an Ethernet network using a CAT5 cable plugged
into the RJ45 socket (P1 port).
2. Go to the Network Connections dialog box, and then click Local Area Connections
button. Right-click and select Properties from the context menu.
3. Highlight Internet Protocol (TCP/IP), and then click Properties button.
4. Click Use the following IP address button, and enter a desired IP address for the PC,
for example,
5. Enter 255.255.255.0
3B NP 10299 2 B
172.16.16.16 in the "IP address:" field.
IP address assigned to the PC must be different to that of the AWIN GW100
rev.2 gateway.
in the "Subnet mask:" field, and then click OK button.

Figure 8: Properties window to change IP address of a PC

These steps may be different depending on MS Windows version used. These
steps are valid for Windows 10 only.
CO NF IG URI NG A PC T O COM MU NI CATE WITH AWIN
G W1 00 REV .2 WIRE LESSHART GATE WAY
29