ABB i-bus
®
KNX
Parameters
7.2.1.5
Baud rate
This parameter is used to define the transmission speed of the Modbus RTU interface. The baud rate
specifies the symbol rate of the data transmission.
The baud rate must be the same for all devices in the Modbus system (client and server).
Option
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Prerequisites for visibility
7.2.1.6
Data Type
This parameter is used to define the data format of the Modbus RTU interface. The parity and number of
stop bits must be the same for all devices in the Modbus system (client and server).
Option
8bit - None - 1
8bit - Even - 1
8bit - Odd - 1
8bit - None - 2
Prerequisites for visibility
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
•
This parameter is in the General parameter window.
•
This parameter is in the General parameter window.
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 33