ABB i-bus
®
KNX
Removal and disposal
11
Removal and disposal
11.1
Removal
Fig. 7: Removing from the mounting rail
1.
Press on the top of the device.
2.
To release the device, pull down the latching lever with the aid of a screwdriver.
3.
Release the bottom of the device from the mounting rail.
4.
Lift the device up and off the mounting rail.
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 61