Operating Instructions
ABB-Welcome
4.2.2
Option 2: Entering the IP address directly
Preconditions:
–
There is a DHCP server on the network, e.g. integrated in the router.
–
The IP gateway is connected to the router by a LAN cable.
–
The PC is connected to to the router by a LAN cable
–
The IP gateway is connected and ready for operation.
1. Link the external device in a common network to the IP gateway.
2. Launch the control panel.
3. Get the DHCP server address according to the following steps.
For example: the DHCP server address is 192.168.1.1.
Fig. 3:
Get DHCP server address
3
6
4
2
Integrating mobile end devices
with ABB-Welcome IP-Gateway
1
5
7
— 11 —