Device X Active - ABB i-bus KNX MG/S 11.100.1.1 Product Manual

ABB i-bus ® KNX
Parameters
7.2.1.14

Device x Active

This parameter is used to define whether the device is activated.
If the device is deactivated, all of its data points are automatically deactivated.
Deactivated data points are taken into account in the Total Gateway Data Points parameter.
Option
No
Yes
Note
This parameter appears in two places:
• The General parameter window
The device parameter window
•
Changing it in one parameter window also changes it in the other.
Example
You can use this parameter to preconfigure a server but not activate it until it is connected to the
gateway.
Prerequisites for visibility
Note about navigation in the PDF: Key combination
'Alt + left arrow' jumps to the previous view/page
The device is deactivated.
The device is activated.
This parameter is in the General parameter window.
•
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 39