Connect the power cable into ARM600‘s back panel Connect to ARM600 using the web browser to https:... (left side). The default IP address of ARM600 is 10.10.10.10. Remember to https Connect the Ethernet cable between the ARM600 LAN port and not http and port 10000.
Page 3
Configuration. Complete customer documentation is available in the product pages that can be accessed through Choose Edit interface eth0, edit the configuration abb.com/mediumvoltage appropriately and click Save. Restart the interface after saving the configuration. — Figure 2. ARM600 Web HMI...
Page 4
With regard to purchase orders, illustrations contained therein. Any reproduction, disclosure to third the agreed particulars shall prevail. ABB does not accept any responsibility parties or utilization of its contents – in whole or in parts – is forbidden whatsoever for potential errors or possible lack of information in this without prior written consent of ABB.