Table of Contents
Advertisement
BA SI C F EAT UR ES O F AWI N GW100 R EV.2
3.2
DHCP Server
The AWIN GW100 rev.2 is compatible with networks that use a Dynamic Host Control Protocol
(DHCP) server for allocating IP addresses.
3.3
Webserver
The AWIN GW100 rev.2 gateway comes with built-in webserver which allows the user to both
configure and monitor WirelessHART network. Moreover, advanced diagnostics are also avail-
able via the webserver.
3.4
Operator Authentication for Webserver Access
Authentication mechanisms are used to authenticate an operator accessing the device and
to verify that the operator is authorized to assume the requested role and perform services
within that role.
Access to the management screens for the AWIN GW100 rev.2 gateway requires that you en-
ter an ID and password. The factory defaults are:
– Access to configuration options
For access to configuration options, use the following log-in:
Username = admin
Password = admin
– Access to monitoring screens
For access to monitoring screens only, use the following log-in:
Username = monitor
Password = monitor
3.5
Modbus TCP Mapping
The AWIN GW100 rev.2 gateway can function as a protocol converter by mapping the HART
command data from the WirelessHART network to Modbus TCP registers. This allows for
easy integration of HART data into Modbus TCP host system.
3.6
Network Topology Table
The AWIN GW100 rev.2 gateway's web interface provides a table with connectivity infor-
mation of WirelessHART devices. It also shows the strength of wireless mesh network in a
color-coded format.
3B NP 10299 2 B
The user must change password after first login or at least before commission-
ing the gateway.
D HCP SERVER
1 7
Advertisement
Table of Contents
Troubleshooting
