Troubleshooting; Chapter 10 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications WRE 2205 User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• WRE2205 Access and Login
• Internet Access
• Resetting the WRE2205 to Its Factory Defaults
• Wireless Problems
10.1 Power, Hardware Connections, and LEDs
The WRE2205 does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the WRE2205.
1
Make sure the power adaptor or cord is connected to the WRE2205 and plugged in to an
2
appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the WRE2205.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Make sure you understand how the LEDs are enabled or disabled. See
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the WRE2205.
5
If the problem continues, contact the vendor.
6
WRE2205 User's Guide
C
HAPTER

Troubleshooting

Section 1.3 on page
1 0
10.
Section 9.6 on page 58.
61