Table of Contents
Advertisement
Table 25 Network Setting > Wireless > WPS (continued)
L ABEL
Register
Method 3
Release
Configuration
Generate
New PIN
Cancel
Apply
7.6 WMM Se tting s
Use this screen to enable WiFi MultiMedia (
networks for multimedia applications.
power management of wireless clients. This allows delay-sensitive applications, such as voice and
videos, to run more smoothly.
Click
Ne two rk Se tting > Wire le ss > WMM
Chapter 7 Wireless
DESC RIPT IO N
Enter the PIN of the device that you are setting up a WPS connection with and click
authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device's settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the WX Device.
Use this section to set up a WPS wireless network by entering the PIN of the WX Device into the
client. Click this switch and make it turn blue. Click
Device.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WX Device.
If this method has been enabled, the PIN (Personal Identification Number) of the WX Device is
shown here. Enter this PIN in the configuration utility of the device you want to connect to using
WPS.
The PIN is not necessary when you use the WPS push-button method.
Click the
G e ne ra te Ne w PIN
Click
to restore the default or previously saved settings.
C a nc e l
Click
to save your changes.
Apply
WMM
WMM
to display the following screen.
WX Series User's Guide
Apply
button to have the WX Device create a new PIN.
) and
WMM Auto m a tic Po we r Sa ve
enhances data transmission quality, while
104
Re g iste r
to activate WPS method 3 on the WX
(
) in wireless
APSD
improves
APSD
to
Advertisement
Table of Contents
