Ntp Server Address - Sanyo VCC-XZN600P Instruction Manual

The default date and time display in [DAYLIGHT SAVING (ON/OFF)] (
according to the area that is selected here.
Sets whether or not to use the daylight saving mode.
It is automatically selected according to the [TIME ZONE] setting. The mode, however, can be changed
manually.
NO USE Disables the daylight saving mode.
USE Enables the daylight saving mode.
According to the [TIME ZONE] setting, the date and time settings of start (ON) and end (OFF) of the daylight
saving mode are automatically displayed in the [WEEK], [MONTH] and [TIME] fields.
They can also be set manually.
Can be used to adjust date and time automatically.
OFF Automatic clock adjustment is not used.
ON (NTP) Retrieves the date and time information from the NTP server and adjusts the clock at the following timing:
When you turn the camera on
The time you specified in the [TIME TO SYNCHRONIZE] preference (
When you change the settings on the [CLOCK SETTINGS] screen
LOGIN When an admin user logs in, the system retrieves date and time data from the PC that is connected to the camera and
(PC) uses it for automatic clock adjustment.
About the [CLOCK ADJUST] Settings
For the camera connected to the Internet:
selecting "ON(NTP)" is recommended.
For the camera not connected to the Internet:
select "LOGIN(PC)" or use the clock adjustment function (24-hour interval) in the clock setting of the
supplied monitoring software "VA-SW3050Lite".
Configuration of the NTP settings are possible only when the [CLOCK ADJUST] preference is set to "ON (NTP)".
TIME TO SYNCHRONIZE
Specify the time for performing the automatic clock adjustment.
REFRESH MANUALLY
When you adjust date and time manually, click the [REFRESH] button to make adjustment.

NTP SERVER ADDRESS

Enter the domain name or IP address of the NTP server used for retrieving the date and time information.
LOG
Displays the date and time for the automatic clock adjustment last performed.
After completing the settings, click this button to confirm the settings.
If you change the setting on the [TIME ZONE] or [DAYLIGHT SAVING MODE (SUMMER TIME MODE)]
preference, the connection will be automatically disconnected, and after about 30 seconds it will be established
again.
8
115 / 153
) automatically changes
6
) (Daily)