Sanyo VCC-XZN600P Instruction Manual page 35

H: Horizontal sizing (1 to 8)
The maximum size of the detection pattern ([V] x [H]) is 9. If setting a vertical or horizontal size
causes this maximum size to be exceeded, the other size will be automatically adjusted.
The detection pattern can be set in 19 sizes, as shown below.
Any motion in the target that is larger than the area of the set detection pattern causes the motion
sensor to respond and output an alarm signal.
The motion sensor does not respond to motions smaller than the detection pattern.
The displayed detection pattern does not indicate the sensing position.
4
Select [MENU] and choose "BACK" or "END" to complete the setting.
You can set masks over objects such as swaying trees and flickering of light, which may cause the motion
sensor to respond incorrectly.
If you do not use masks, set [MASKING] to "OFF".
1
Use the / button to select [MASKING], use the
SET button.
The MOTION MASKING screen appears, with a blinking mask pattern shown at the top left.
/ button to choose "ON", and press the
35 / 153