Sanyo VCC-XZN600P Instruction Manual page 112

When you click the [SECURITY] button on the [NETWORK SETTINGS] screen, the [SECURITY SETTINGS]
screen appears.
You can set the camera access restriction to the PC.
Select "ON" when you set the access restriction.
Used to set the access restriction for the PC that is not registered on this screen.
REJECTED Rejects the access from the PC that is not registered.
AUTHORIZED Allows the access from the PC that is not registered.
Used to specify the IP ADDRESS and SUBNETMASK (8 - 32) of the PC to which the access restriction is set
individually.
Up to 10 PCs can be registered.
Sets the access restriction to the registered PCs individually.
REJECTED Rejects the access.
AUTHORIZED Allows the access.
When all the settings on the [SECURITY SETTINGS] screen are completed, click the [SET] button to save the
settings.
112 / 153