Sanyo VCC-XZN600P Instruction Manual page 28

Sets the electronic shutter.
If you do not use the electronic shutter, set [SHUTTER] to "OFF".
SHORT: Fast shutter speeds
LONG: Slow shutter speeds
For fast-moving objects, setting a faster shutter speed will reproduce clearer images with less blurs.
If fast shutter speeds (SHORT) cannot be set:
[SENSE UP] (electronic sensitivity boosting) or [EI] (electronic iris) is set.
1
Use the / button to select [SHUTTER], use the
the SET button.
The ES SETTING screen appears.
2
Use the / button to select the desired shutter speed.
Available settings:
PAL: 50, 120, 250, 500, 1000, 2000, 4000, 10000
NTSC: 60, 100, 250, 500, 1000, 2000, 4000, 10000
3
Select [MENU] and choose "BACK" or "END" to complete the setting.
Increasing the exposure time will improve the sensitivity, ensuring clear images even if the target objects are
dark.
If slow shutter speeds (LONG) cannot be set:
[SENSE UP] (electronic sensitivity boosting) or [EI] (electronic iris) is set.
[MOTION] is set to "ON".
Setting a slow shutter speed causes the following:
The [V-RESO.UP] (vertical resolution increase) settings will be cancelled.
1
Use the / button to select [SHUTTER], use the
the SET button.
The ES SETTING screen appears.
/ button to choose "SHORT", and press
/ button to choose "LONG", and press
28 / 153