Sanyo VCC-XZN600P Instruction Manual page 96

1
Click the [Advanced] tab.
2
Make sure that the "Use SSL 2.0" and "Use SSL 3.0" options under the "Security" section are
enabled. If disabled, select the options.
1
Click the [General] tab.
2
Under the "Temporary Internet Files" section, click the [Settings] button.
3
In the "Amount of disk space to use:" setting, set the lower value.
1
Click the [Advanced] tab.
2
Under the "Browsing" section, disable the "Display a notification about every script error"
option.
3
Enable the "Disable script debugging" option.
96 / 153