Sanyo VCC-XZN600P Instruction Manual page 25

2
Use the
press the SET button.
The BLC SETTING [SIZE] screen appears.
3
Use the
the SET button.
The BLC WINDOW WEIGHTING screen appears.
Use the /
4
Use the / button to select each spot to be weighted and use the
weighting value.
Spot evaluative metering will occur in five spots: TOP, BOTTOM, LEFT, RIGHT, and CENTER.
The weighting value of [CENTER (FIX)] is fixed to "7".
Available settings: 0 (minimum) to 7 (maximum)
buttons to determine the position of the backlight compensation zone and
buttons to determine the size of the backlight compensation zone and press
button to change the vertical size. Use the / button to change the horizontal size.
25 / 153
/ button to set the