Sanyo VCC-XZN600P Instruction Manual page 67

moves to the next digit.
Perform the same procedure repeatedly until you enter the last character of the camera title.
The camera title can use up to 16 characters. "?" indication for the unused digits will not be displayed
in the monitor.
"(2)" in the character selection panel represents the carriage return character. When the character is
entered, the carriage return is inserted (the cursor moves to the first digit of the next line).
If you want to change a character in the title, use the
entry field:
the new character.
3
After completing the camera title setting, use the
the SET button.
The camera title you set appears in the top left corner of the screen.
4
Use the
press the SET button.
The camera title setting screen appears again.
5
Select [MENU] and choose "BACK" or "END" to complete the setting.
1
Use the / button to select [ZOOM RATIO], use the
the SET button.
The current zoom magnification power appears in the right bottom corner of the screen.
", and then use the /
buttons to determine the position for the camera title to be displayed, and
/ button to move the cursor into the "title
button to move the cursor to the desired position, and enter
/ button to select [POSITION], and press
/ button to choose "ON", and press
67 / 153