Sanyo VCC-XZN600P Instruction Manual page 127

OFF Disables the timer transmission.
ON Transfers the images using the timer.
SCHEDULE Sends the notification e-mails using the timer only during the scheduled time.
CAMERA ID
This is inserted in the file name of timer-transmitted images. It is also used as the name of the folder created
on the server.
You cannot use the following letters for CAMERA ID:
" ' " (single quotation), " " " (double quotation), "\" (backslash), "/" (slash), "<", ">", "?", "|", "*",
":" (colon) and ";" (semicolon).
If the CAMERA ID is not configured, "sanyo" and "timer" are substituted as the file name and folder
name respectively.
OVERWRITE
Configures whether or not to overwrite file data transmitted to the FTP server.
OFF Stores all files without conducting overwrite.
(date and time information is displayed in the file name)
ON Overwrites.
(date and time information is not displayed in the file name)
TX RATE
Configures the image transmission interval.
The FTP transfer log is displayed.
After completing the settings, click this button to confirm the settings.
To restore the original settings, click the [CANCEL] button before clicking the [SET] button.
Displays the [HELP] screen in a separate window.
When "SCHEDULE" is selected for the [ALARM] or [TIMER] option, specify the duration for the alarm
image to be transferred and set the [ALARM (FTP)]/[TIMER (FTP)] to "ON" on the SCHEDULE
SETTINGS screen.
The file names of alarm images are composed as follows.
File name = Camera ID_date and time information (yymmddhhmmss)_4-digit serial number +
extension (.jpg)
When [OVERWRITE] is configured to "ON", date and time information is not displayed.
127 / 153